home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Best of Select: Games Special 7
/
TboS Games Special 7.iso
/
kids
/
hoorayma
/
setup.txt
< prev
next >
Wrap
INI File
|
1996-04-28
|
9KB
|
306 lines
[LANGUAGE]={UK ENGLISH}
[0000]={Welcome to }
[0001]={. We recommend study of the User Guide}
[0002]={for information on the features available in the full version.}
[0003]={This setup program will enable you to configure }
[0004]={for your own particular use. It will also set up working directories}
[0005]={on your hard disk and copy certain essential files to them.}
[0006]={}
[0010]={Cannot load essential INI file. Check your manual and}
[0011]={the README file for further setup information.}
[0012]={ Help - 'Source drive:' }
[0013]={Type in the letter of the drive which currently contains your CD,}
[0014]={then press <Enter>.}
[0015]={}
[0016]={Source drive: }
[0017]={ Help - 'Working drive:' }
[0018]={You must specify an area of your hard disk where certain}
[0019]={information can be stored. Type the hard drive letter then press}
[0020]={<Enter>.}
[0021]={Working drive: }
[0022]={ Help - 'Working directory:' }
[0023]={If the directory displayed is the one you want, simply press <Enter>.}
[0024]={Otherwise, type in the required name then press <Enter>.}
[0025]={NB: The working directory will contain the sub directory }
[0026]={NB: The working directory will contain the sub directories:}
[0027]={Working directory: }
[0028]={ Press <F10> to begin Setup. Press <Esc> to quit. }
[0030]={}
[0031]={Do you really want to quit? Press 'Y' for yes or 'N' for no.}
[0033]={Error: }
[0034]={File }
[0035]={ not found.}
[0036]={Path not found.}
[0037]={Too many files open.}
[0038]={Access denied to file }
[0040]={}
[0041]={The settings you have chosen are:}
[0042]={ Install from a CD in drive }
[0043]={ Store files in directory }
[0044]={Press 'Y' to proceed with these settings, any other key to stop.}
[0045]={Installing:}
[0047]={No disk present, faulty disk, or no such disk drive!}
[0048]={ Put the master disk in drive }
[0049]={ Press <Esc> to stop, any other key to continue.}
[0050]={}
[0052]={ Put the master disk in drive }
[0055]={ Put the destination disk in drive }
[0058]={ The destination disk has insufficient space for}
[0059]={ setup (}
[0060]={, bytes needed, }
[0061]={ bytes available).}
[0064]={The destination disk has sufficient space for setup.}
[0065]={}
[0067]={ The destination disk has sufficient space for setup.}
[0070]={}
[0071]={Setup information already exists. Do you want to}
[0072]={overwrite it? (Y/N).}
[0074]={Unable to create directory }
[0075]={ Press <Esc> to stop, any other key to try again.}
[0078]={Unable to create directory }
[0079]={Error: Directory path is invalid.}
[0080]={Error: Invalid file handle.}
[0081]={Error: Destination disk is write protected.}
[0082]={Error: Drive not ready.}
[0083]={Error: Device write fault.}
[0084]={Error number: }
[0085]={}
[0086]={ Press <Esc> to stop, any other key to try again.}
[0090]={Creating: }
[0091]={ - CD Version}
[0093]={ It is not possible to write data to this CD. It is essential,}
[0094]={ therefore, to create a directory on your hard disk where certain}
[0095]={ files can be stored ('}
[0096]={'). The '}
[0097]={' directory}
[0098]={ is used solely for this purpose. Should you no longer wish to use}
[0099]={, you can delete this directory and its files.}
[0100]={Copying: }
[0103]={Warning!}
[0104]={========}
[0105]={The program has attempted to create a data directory on your hard}
[0106]={disk but has been unable to do so. This means that results, high}
[0107]={scores and defaults will not be updated during play.}
[0108]={ Press <Esc> to quit or any other key to continue.}
[0109]={Copying:}
[0110]={}
[0113]={ Setup completed.}
[0115]={}
[0116]={ Press any key to continue.}
[0117]={Remove disk: }
[0118]={ Press any key when finished.}
[0119]={Insert disk: }
[0120]={}
[0121]={Unpacking files, please wait...}
[0122]={Not enough memory available to unpack the files.}
[0123]={To complete the setup type }
[0124]={ in directory }
[0125]={ at DOS prompt.}
[0126]={The file }
[0127]={.exe' has not been found on this disk, so it has}
[0128]={not been possible to unpack the files.}
[0129]={DOS error }
[0130]={ reported when attempting to unpack files.}
[0131]={Press any key to continue.}
[0134]={Source drive: }
[0135]={Working drive: }
[0136]={Working directory: }
[0139]={ - HELP}
[0140]={Parent/Teacher Section}
[0143]={ - Setup Program V1.0 }
[0144]={ Introduction }
[0145]={NB: If you want to run }
[0146]={ from Windows, you should exit}
[0147]={this DOS Setup Utility now and use the Windows version. To run}
[0148]={the Windows version select File, Run from Program Manager, then}
[0149]={type X:\SETUP where X is the drive containing your CD.}
[0150]={(C) Lander Software 1996}
[0151]={ Press any key to continue, <Esc> to quit. }
[0153]={Working area: }
[0155]={}
[0160]={}
[0165]={}
[0170]={}
[0175]={}
[0180]={}
[0185]={}
[0190]={}
[0195]={}
[0200]={}
[0205]={}
[0210]={}
[0215]={}
[0220]={}
[0225]={}
[0230]={}
[0235]={}
[0240]={}
[0245]={}
[0250]={}
[0255]={}
[0260]={}
[0265]={}
[0270]={}
[0275]={}
[0280]={}
[0285]={}
[0290]={}
[0295]={}
[0300]={}
[0305]={}
[0310]={}
[0315]={}
[0320]={}
[0325]={}
[0330]={}
[0335]={}
[0340]={}
[0345]={}
[0350]={}
[0355]={}
[0360]={}
[0365]={}
[0370]={}
[0375]={}
[0380]={}
[0385]={}
[0390]={}
[0395]={}
[0400]={}
[0405]={}
[0410]={}
[0415]={}
[0420]={}
[0425]={}
[0430]={Hooray for Maths - HELP}
[0431]={Parent/Teacher Section}
[0432]={View Results}
[0433]={ HELP: }
[0434]={ Press <F1> or <Esc> to leave HELP }
[0435]={HELP}
[0436]={Press any key to continue}
[0437]={Press <Esc> repeatedly to go to the}
[0438]={Control Screen.}
[0439]={Press <Ctrl-Q> to quit the program.}
[0440]={}$
[0442]={ HELP: }
[0443]={Use the UP and DOWN cursor keys and <PgUp>,<PgDn> to move around}
[0444]={the document.}
[0445]={To print the document, press <Ctrl-P>.}
[0446]={To leave HELP press <Q> or <Esc>.}
[0447]={ Press <F1> for HELP <Q> to quit}
[0448]={File not found: }
[0449]={Path not found, or invalid file name: }
[0450]={Drive not ready: }
[0451]={Disk seek error: }
[0452]={File error }
[0453]={ reported}
[0454]={This file is empty - press a key}
[0455]={Printing file - please wait}
[0456]={Line:}
[0457]={HELP - }
[0458]={Printer error '}
[0459]={' discovered}
[0460]={Retry [Y/N]}
[0461]={--------------------------------------------------------------------------------}
[0462]={Not enough memory to view help files - press any key.}
[0465]={Too many screens}
[0466]={ HELP }
[0467]={ Dialogue }
[0468]={'Press:}
[0469]={ Y for yes}
[0470]={ N for no}
[0473]={Enter another filename}
[0474]={or}
[0475]={press <ESC> to skip}
[0476]={Once you have read}
[0477]={the information in}
[0478]={the dialogue box,}
[0479]={press <Esc> to go on}
[0480]={Error: Not enough RAM to run this program.}
[0481]={ bytes requested but only }
[0482]={ bytes available.}
[0483]={Do you have a printer connected}
[0484]={and is it ready to print? [Y/N]}
[0485]={Printer error (}
[0486]={) discovered}
[0487]={Retry [Y/N]}
[0488]={EPSON DOT-MATRIX}
[0489]={HP LASERJET II }
[0490]={IBM PROPRINTER }
[0495]={}$
[0500]={ Settings: IO_Address : }
[0501]={ IRQ_number : }
[0502]={ DMA_channel : }
[0503]={About to get sound info from }
[0504]={Sound card information not found. Type 'SSETUP' then press <Enter> to}
[0505]={configure this program.}
[0506]={Initialising driver: }
[0507]={Couldn't load sound driver }
[0508]={Error: Not enough memory.}
[0509]={Error: Unable to open driver file.}
[0510]={Error: Unable to locate driver file.}
[0511]={Press any key to continue}
[0513]={Driver }
[0514]={ not compatible with API version.}
[0515]={Driver }
[0516]={ not found at these settings:}
[0517]={Use 'SSETUP' to configure this program correctly.}
[0520]={ Sound Card Diagnostics}
[0521]={ ======================}
[0522]={ Voice driver }
[0523]={ loaded OK.}
[0524]={ not loaded.}
[0525]={ Music driver }
[0526]={ Global timbre name - }
[0527]={ General sound status - }
[0528]={ Mouse driver loaded - }
[0529]={ Press any key to continue}
[0530]={}$
[0532]={in first time,1 }
[0533]={in first time,2 }
[0534]={Memory Error.}
[0535]={in first time,3 }
[0540]={}
[0545]={}
[0550]={}
[0555]={}
[0560]={}
[0565]={}
[0570]={}
[0575]={}
[0580]={}
[0585]={}
[0590]={}
[0595]={}
[0600]={}
[0605]={}
[0610]={}
[0615]={}
[0620]={}
[0625]={}
[0630]={}
[0635]={}
[0638]={Do not show memory warning message.}
[0640]={ HELP: }
[0641]={Use the UP and DOWN cursor keys and <PgUp>,<PgDn> to move around}
[0642]={the document.}
[0643]={To print the document, press <Ctrl-P>.}
[0644]={To leave HELP press <Q> or <Esc>.}
[0645]={ Press }
[0646]={<F1>}
[0647]={ or }
[0648]={<Esc>}
[0649]={ to leave help }
[0650]={}
[0654]={ for HELP, cursor keys (}
[0655]={<PgUp><PgDn>}
[0656]={) to navigate, }
[0657]={<Q>}
[0658]={ to quit}
[0660]={}
[0662]={Not enough memory to view help files - press any key.}
[0665]={}
[0670]={}
[STOP]